Tag Archives: baseline grid

InDesign Defaults

When Matthew Butterick mentioned this series as a good online source for reading about typography, he also mentioned its general bias towards InDesign in the examples I give. That’s true. And while I deal with and have dealt with plenty of other tools, software and otherwise, for editing, writing, drawing, setting and composing what will ultimately become design that’s typographic in nature, InDesign, particularly the few-generations-old InDesign, is the one I regularly turn to when working with digital type.

Screen Shot 2014-05-08 at 10.13.05 PM

I have to a limited extent touched on the most popular typographic medium, hypertext, and its conveyance, your browser, but it’s still unnecessarily complicated to talk about a simple concept in a simple way, say, kerning, or small caps, when web standards aren’t there yet, and there’s no good way of ensuring that the results I’m getting are the ones you’ll get. Other stuff like columnar layout and text flow, H&J, baseline grids, and the ability to detect the size of final output, are altogether missing from browsers or in their infancy. All that, and the fact that a fixed medium  lends itself well to making a single set of arbitrary and finite adjustments here and there is one of the things that has always drawn me to print work, and for this specific purpose (demonstrating the principles of typography), caused me to remain with a tool made for print production. (That said, I do plan to focus more on typography in the new medium as part of Using Type, but I’ve had a good long run so far sticking to the basics in the old.)

Internal note

As a kind of wrap to what I’ve written in the series thus far I thought, ‘This writing isn’t really giving much of a glimpse into the typographer’s brain; more like the brain stem.’ These principles I’ve covered aren’t what typographers talk about, just as musicians rarely discuss fingerings, or emergency room doctors their stitching technique. These become built-in, and felt, and what happens beyond that point in the creative process becomes much harder to describe. That’s where I want to go though. At least get to something concrete that articulates a principle better than, ‘You’ve just got to feel it.’ There’s wisdom in following one’s instincts, but if the reader doesn’t see the reasoning that leads to the platform from which the typographer instinctively leaps—to the next decision, little good it does. Those benefited are almost exclusively the readers who already understand the concept, those who also ‘just feel it.’

Anyway, forget all this. I’ll get to it and either strike gold or retreat. Today, and over the next couple of weeks, I want to talk more about what happens inside that typographer’s brain stem. And this is shop talk, the painter reviewing his list of brushes and ladders, the photographer his lenses. Kind of as a last final rundown, I want to go specifically over the conscious decisions made working with InDesign before the first project file opens.

General note on setting defaults

When in InDesign, or any of the major CS or CC Adobe apps, the way to set a program-wide default is by setting something while no documents are open. To make document-wide defaults, (and I’m actually not sure this works everywhere) you specify something while nothing in the document is selected. There are other defaults, such as New Document and Print menu defaults, which are set within those menus using a Save Preset dialog.

The defaults

With no documents open, consider what to keep from what’s already chosen for you by default. In the Character palette, set the font family and size if you have one in mind. Here I set mine to Jordi Embodas’s Pona 9 pt and leave the leading set to auto. That’s what the parentheses mean.

Screen Shot 2014-05-08 at 8.58.25 PM

Now, this next part is important. Set the kerning value to Metrics. This, not optical, should be your default. See above.

Screen Shot 2014-05-08 at 9.21.00 PM

Also, through the top rightmost button on the Character palette, which looks like a tiny down arrow next to three horizontal lines, enable Ligatures and Contextual alternates. This last one allows for example complex connected scripts to work as intended.

Screen Shot 2014-05-08 at 9.10.04 PM

On to Paragraph. Select the Align to baseline grid option at the lower right. I also recommend hyphenation being on by default. Change if you disagree, or if the language you primarily work in doesn’t have a very good hyphenation dictionary or whatever.

Screen Shot 2014-05-08 at 9.36.11 PM

The place you set up the baseline grid is under (on the Mac) InDesign > Preferences > Grids, or the same under the Edit menu in Windows. Here I set my increment to 6 pt, and Start at the top, 0 in.

And of course I use points and inches because I’m an American, but if you’d prefer millimeters and centimeters, the same can be set one dialog up from Grids in Units and Increments.

Screen Shot 2014-05-08 at 9.47.47 PM

Unless you work primarily with Pro fonts, the following is ill-advised: Go to Advanced Type and set the Small Cap height to 25%. And while you’re at it, you may consider altering the superscript and subscript values. What will this do? Instead of InDesign surreptitiously inserting fake small caps, this setting will make all fake small caps terribly noticeable. You can then go and replace them with properly drawn and proportioned real small caps. The same goes with these settings for super- and subscripts.

Screen Shot 2014-05-08 at 10.07.44 PM

Screen Shot 2014-05-08 at 9.59.37 PM Screen Shot 2014-05-08 at 10.02.38 PM

Lastly, hyphenation and justification. Follow these settings, referring to my post on the subject to know when to deviate, for example, when exporting a PDF to be read primarily on-screen you should never scale glyphs. These are set from the top rightmost corner of the Paragraph palette. After looking at it, I think I’ll have to revisit my decisions on the hyphenation of certain words or words that lie in precarious places.

That’s it for now. What am I leaving out? Next week we’ll continue on the subject of defaults. Thanks again goes to Jordi Embodas’s Pona (my new default!) for setting the title.

Using Baseline Grids

Let’s dive in. If you missed the theoretical introduction on baseline grids, you may want to review it first. It’s a quick read. In this section I’ll give a few pointers on getting the interval right, some specifics on how to set up an InDesign document, and I’ll likely keep it pretty vague discussing baseline grids on screen media.

Using Type, set in Premiéra

Adhering to an appropriately adjusted baseline grid irons out small mistakes and makes the large ones you really should know about much more evident. Here’s a text frame with some bobbles in the vertical spacing, and the same text frame aligned to the document’s baseline grid. Note how when the leading or line spacing is slightly under the set increment of our grid, the line of copy is still forced to the next spot down. Near the bottom of the text frame, the leading is greater than the baseline grid’s increment, so again, the line is kicked down to the next indicated spot for a baseline on the baseline grid. If you’re wondering how to make it align, here’s how: Select the text frame, then ‘Align to baseline grid’ at the bottom right corner of the Paragraph panel.

Align to baseline grid

Above: On the right, lines of copy are kicked down to the next marked baseline on the grid.

To turn the grid on and off, either use View > Grids & Guides > Show/Hide Baseline Grid, or I’d suggest using a keyboard shortcut. You can assign your own if the default doesn’t make sense to you. While you’re at it, assign a similar shortcut to access the baseline grid settings. The dialog you’re looking for is at Edit > Preferences > Grids (Windows) or InDesign > Preferences > Grids (Mac OS).

Baseline grid dialog

Tip: Open this dialog without any documents open, put in some values. Close. It’s now your default baseline grid setting.

Finally, a few general design concerns: Baseline grids should relate to the overall composition of the piece you produce. If it’s a print piece especially, find a measure and grid increment that relates well to the physical size of the medium. This may be, but isn’t necessarily a dimension derived from the larger document. Don’t be too dogmatic about it though, use your eyes and adjust as needed.

InDesign is quite capable of rendering baseline grids set to increment in fractional units. There’s nothing special about the 6 pt setting above. If 5.718 pt works better, use that.

Grouping bits of pertinent info

Letting your body text land on every other or every third grid increment is advisable. When testing your grid, make sure to account for cases such as multi-line bulleted list items.

That’s all for now. Using Type continues here Thursday. Our supporting typeface is Thomas Gabriel’s Premiéra. I’ll add more to this bit on baseline grids if there’s demand for it. Is this helpful? Let me know.

Follow

Get every new post delivered to your Inbox.

Join 61,754 other followers